Kawasaki Ninja ZX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
30 Posts
Is the wheel turned around backwards? Sprocket carriers don't have bearings. Wheels have bearings and sprocket carriers are on a cush drive hub that slides into the wheel hub, not over it, but over the bearing. Either you have the wrong hub, the wrong bearings, or someone sabotaged you and built it backwards.
 

·
Registered
Joined
·
30 Posts
Jeez man you need to stop trying to help people with problems as your obviously Guessing rather than giving pertinent advice.
Fuck all goes in this side except a Spacer (Not shown) and the Wheel Hub, The Bearing for the sprocket carrier is fitted the other side clearly shown in the op's image #5.
Reply to kveA
Look at the gadum picture you ******. Its flipping obvious that there's a race still in there you ignoramus
 

·
Registered
Joined
·
30 Posts
I hope you aren't a mod because you are a wanker KevA. It's where's Waldo, not rocket science you freaking pervert.

The fact that you can read the numbers on the lip of the race proves its a race and not the spacer you are talking about. Try reading
Tire Automotive tire Product Musical instrument Font

Tire Wheel Automotive tire Tread Synthetic rubber
 
1 - 5 of 5 Posts
Top