Kawasaki Ninja ZX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
165 Posts
Discussion Starter #1
So..i´m right into the engine swap from a 95´ZX9-engine into my ZX7 P3, and will face a few issues to solve, i guess.

For now the 9 engine is in the frame and i´m about to connect all the rest (hoses, electrical, radiator etc.)

I have come to the point where i´m about to mount the radiator on the bike, and are unsure of wich radiator to use - the one from ZX9 or the one from ZX7?
Will the 9´radiator fit on the 9´engine in the 7´frame?
 

·
Registered
Joined
·
165 Posts
Discussion Starter #3
I just wonder how the original radiator is supposed to be mounted to the engine? They are both ZX9-pieces from the same bike and should fit.
The upper mount in the frame is done, but how are they supposed to be mounted in the lower mounts on the engine?

On the pictures here, the radiator is hanging free from its upper mounts, and it looks like there is very little space between the radiator and the exhaust pipes...is this right?
17345


17346
 
1 - 4 of 4 Posts
Top