Kawasaki Ninja ZX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi all

Recently bought a 2007 zx10r ninja. Great bike except that the rear seat is loose. It still locks in at the front but there appears to be a movement of a least an inch vertically. Not sure if I can take the locking mechanism apart to fix somehow, or build up the gap between the rear cover and the seat using rubber or foam.
Any suggestions???
Thanks for your asistance.
 

·
Registered
Joined
·
1 Posts
Hi Jorgie7784,

I have the same problem, it appears I may have a zx6r seat when comparing part numbers from the bottom of the seat.
The seat I have is 53066-0099 (2005 ZX6R) and I assume it should be a 53066-0151(2007 ZX10R).
see these web pages and check your seat part number.
http://www.kawasakioemparts.com/oemparts/a/kaw/500b4521f8700223e479585e/seat
http://www.kawasakioemparts.com/oemparts/a/kaw/500b4c4cf8700223e4795eed/seat

There are two part numbers, one is for the seat only 53003A-0094-MA (without attaching bracket) and the other is the full assembly 53066-0151-MA
 
1 - 2 of 2 Posts
Top