Kawasaki Ninja ZX Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,170 Posts
Discussion Starter · #1 ·
I need to know what are HP numbers that Kawasaki is claiming for the ZX-14.
If possible, I would need the number with and without ram-air effect.
Also, I suppose the numbers are crankshaft HP (vs RWHP) but please confirm. Thanks!

NOTE: All I need are factory numbers; no need to state that a pipe and/or a PC3R or any module will give this or that amount of HP.
 

·
Registered
Joined
·
2,170 Posts
Discussion Starter · #2 ·
Sorry, I just found them at Kawasaki's website...
Maximum Power 190PS @ 9,500rpm
Maximum Power w/ Ram Air 200PS @ 9,500rpm
Maximum Torque 154 N-m @7,500rpm
 

·
Registered
Joined
·
13 Posts
Hello from Athens. A friend of mine has put the bike on a Factory Pro Dyno (NOT Dynojet) and it made 195,36 rwhp along with 15,3kg of torque. The bike has Marchesini wheels, full Muzzy exhaust and a Power Commander fitted. No Ram-Air working. For it, add a 6-7% on the 195 hp. It is quite a great gain in Power if you consider the bike makes 160-165 rwhp and 13,5 kg of torque when in stock condition.
Also, Factory Pro Dynos measure the REAL wheel power and they are not 'tuned' to show the power stated by the manufacturer, as Dynojets are. Just for the story, the same bike showed 224,25 hp (NO RAM AIR) on the wheel on a Dynojet, something which is definitely not reflecting the truth...

Panos,
Athens, GR
 
1 - 4 of 4 Posts
Top