what things to consider when installing a turbo
Join the discussion
Recommended Reading
-
2009 ZX6R TPS pin location on the ECU? Please help
Mechanical & TechnicalI need to know the pin location of the TPS wire in the ECU connector so I can finish my PCV install I have no yellow wire with a white stripe please help,, 2009 ZX6R monster edition- 0
- 23
-
Codyw1974 · updated
-
Air in brake line
Mechanical & TechnicalI took off the front brake resevoir on my zx-14 to clean it out and after I put it back on, now there is air in the line and I have to bleed it evry 5 days to get a hard lever. There is no sign of fluid leaking anywhere. I put silicone caulk on the inside of the small hose that comes out of the...- 2
- 54
-
easyrider4 · updated
-
ZX7 P3/ZX9 b conversion
Mechanical & TechnicalSo..i´m right into the engine swap from a 95´ZX9-engine into my ZX7 P3, and will face a few issues to solve, i guess. For now the 9 engine is in the frame and i´m about to connect all the rest (hoses, electrical, radiator etc.) I have come to the point where i´m about to mount the radiator on...- 2
- 98
-
MickeZX7R · updated
-
TROUBLESHOOTING 101 and nerd tech orgasms
Mechanical & TechnicalTROUBLESHOOTING 101 and vast technobabble ok. theres a constant rash of simple shit on here that results of either not searching or not knowing mechanical stuff.. hopefully this will kinda guide you in the right steps.. I will probably amend this in time to include other issues but for now...- 73
- 23K
-
whitehendrix · updated
Join now to ask and comment!