[speedy sie]

as above.

 

[christikitty]

What year is the bike?

 

[speedy sie]

the casings engine is 96,have a set of unmarked kit/works casings,have had a bit of work done to them in sides are all cleaned up,i have the clutch for the gear driven oil pump.

 

[speedy sie]

any one???

 

[Bullitt]

Try Redmonkey...

Josh

 

[XXWoodmanXX]

I have a 96 zx7 I am parting out. Still have the whole motor and carbs (a la minus the alternator, that is)

If the gear-driven oil pump is the canister right beside the oil filter, than you are in luck. PM me.

 

[airgreesemonkey]

just buy new oem, the 7's oil pump runs metal on metal and buying used is a huge gamble. the oil pump is located on the same shaft as the water pump which is driven by the alternator chain inside the clutch compartment, not next to the oil filter (that is the oil cooler).

 

[2fat2fly]

just buy new oem, the 7's oil pump runs metal on metal and buying used is a huge gamble. the oil pump is located on the same shaft as the water pump which is driven by the alternator chain inside the clutch compartment, not next to the oil filter (that is the oil cooler).

Guys,I believe he is looking for the gear driven oil pump used with the gear drive assembly used with either the Suter dry clutch (which is what I think he's looking for) or with the gear drive assembly that replaces the cam chain on race bikes. The standard oil pump is driven by a chain .

 

[speedy sie]

its for the kit wet clutch set up that uses the gear driven oil pump set up,iv now got hold of a few gears that have the same teeth ,pitch set up so may be able to make a set up like the kit items...if i can find the right size gears

 

[speedy sie]

can any help me out with some info need the o/d of the two gear and also the amount on teeth on both gears.

 

[Bullitt]

Are you posting these questions over on Redmonkey? There are quite a few guys there with ex-SBK bikes that can help you.

Josh

 

[speedy sie]

will do:cheers

 

[2fat2fly]

can any help me out with some info need the o/d of the two gear and also the amount on teeth on both gears.

I have one of the kit oil pump gears for the wet set up utilizing the chain drive. I will pull it out of the parts bin and count the teeth for you. That might help a little.

 

[speedy sie]

the one im after is for the gear driven, mesh type gear no chain used its the same as the one in the kit manual if this helps

 

[2fat2fly]

the one im after is for the gear driven, mesh type gear no chain used its the same as the one in the kit manual if this helps

Do you have the part number?

 

[speedy sie]

part #59051 and #13216

just need the o/d and amount of teeth,that would en great or better if you know any one with them for sale??...i can make the rest up to use the gears.

 

[2fat2fly]

part #59051 and #13216

just need the o/d and amount of teeth,that would en great or better if you know any one with them for sale??...i can make the rest up to use the gears.

Now I see what you're looking for. The complete part numbers are:
13216-1156 Gear-Comp.
59051-1315 Gear-Spur
These are for the 96 ZX750 NR1 engine (Kit parts).

I recently acquired a bunch of parts for the older ZX7R's. They're all in this link:

http://www.zxforums.com/forums/zx-7r-forum/64410-my-93-zx7r-real-m1.html

Mine is a completely different generation part than what you're looking for.