Kawasaki Ninja ZX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
So I'm just getting over a fractured ankle and pulled my baby out of storage. First thing I noticed was no rear tail light or brakes (all in one LED assembly). I proceeded to disconnect the assembly and the fuse still popped. Then I disconnected the license plate light. Fuse was good. Then I connected the tail light and it was on without blowing the fuse. The next day the fuse popped again. Now without the tail light or license plate light connected to the circuit, the fuse still popped! The harness from the fuse block back to the tail looks fine. I hate taking my bikes to the shop.. I have been doing all my own work for 20yrs. My next step is just stripping the bike down, but I'm frustrated and just want to ride now that I can walk for the first time in 2 months. Any ideas I can try from my fellow riders?
20142
 

·
Registered
Joined
·
343 Posts
I'm not a zx10 person and I don't know which one that is, but, If it only blows the fuse when the brakes are used then check those switches and looms.
 
1 - 2 of 2 Posts
Top