Kawasaki Ninja ZX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter · #1 ·
has anyone ever had to replace the stator cover on an 05 636 before? and if so then how difficult would it be to do. do i need to drain the oil first to do it or is it simply a cover plate. any help would be appreciated.
 

·
Registered
Joined
·
92 Posts
pretty basic, just take out the bolts arround the cover and pull it off (may not slide ride off due to the magnets so be affraid if u have to use some mussle) and then just replace it with the new one. You should pick up a new seal for it as well and make sure u remove the old one and clean the gasket surface really well. You don't need to drain oil but some might poor out when u unbolt the cover. Just top the oil up after when you're all done if need be. thats pretty much it. PM me back if u have anymore questions
 
1 - 2 of 2 Posts
Top