Kawasaki Ninja ZX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 · (Edited)
I cut 50 mm off from original screen. In the photo there is the taller factory screen.





In the video I am driving with this smaller, cutted screen.

7 Mb DivX video gtr screen.avi

I think you can even hear the difference between screen up and down (speed only 80 kh/h). :clap

When this smaller, cutted screen is up, it is about at same height than original in halfway up.

Next step: I cut 30 mm off.:banghead

Stay tuned....:eek:hno
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #2 ·
Now the second cut is done. The screen is now about 80 mm shorter than original.







I will drive today (with mt wife) some hundred kms. I will give some comments after that. :smile
 

·
Registered
Joined
·
104 Posts
TimoFin - good work. I particularly like the look of the shorter screen. Look forward to hearing how you and in particular your wife find it.

How did you go about cutting the screen down? I'm concerned it might crack.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 · (Edited)
Thanks-

our trip was quite short (temp 12 c, windy), but some 150 km anyway.
I enjoy this short screen. We drove almost the whole trip screen at the lowest position. That's where my wife wanted it to be. Me too.

I wonder when Kawasaki will offer also this shorter option for screen. Real SPORT-tourer screen.

PS. I tried also speeds up to 160 kmh. No problems, the feeling was quite like zzr1400. :mfclap

PPS. The tool was ordinary jig saw. No cracks.
 

·
Registered
Joined
·
451 Posts
Nice job TIMO ...Brave Man:mfclap
 
1 - 5 of 5 Posts
Top