Kawasaki Ninja ZX Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
117 Posts
Discussion Starter #1 (Edited)
Can anyone tell me what the lengths of both the stock and the protek shift linkages? I have a protek shifter on a woodcraft rearset and the woodcraft shift linkage is too long so I'm trying to find a replacement.

Or what the threads are so I can cut & thread the rod
 

·
Premium Member
Joined
·
6,535 Posts
Can anyone tell me what the lengths of both the stock and the protek shift linkages? I have a protek shifter on a woodcraft rearset and the woodcraft shift linkage is too long so I'm trying to find a replacement.

Or what the threads are so I can cut & thread the rod
When I get home tonight I'll measure my Protek and stock links.
 

·
Premium Member
Joined
·
6,535 Posts

·
Premium Member
Joined
·
6,535 Posts
Thread pitch appears to be 1.00mm X 6mm on both. If you shorten your protek rod remember one end is reverse thread. If you cut the wrong end it could ruin your day.
 

·
Registered
Joined
·
117 Posts
Discussion Starter #6
Thread pitch appears to be 1.00mm X 6mm on both. If you shorten your protek rod remember one end is reverse thread. If you cut the wrong end it could ruin your day.
Thanks for doing that! Hah, my day has already been ruined as I found a whole bunch of dryer lint (fuzzy stuff) in the clear coat of my gas tank I just painted.
 
1 - 6 of 6 Posts
Top