hey people. new here, been reading up a little, but just came across a prblem with my taillight on my 97 zx7r. the turn signals are integrated, and running lights work, as well as both turn signals. The brake light is not coming on with either the handbrake, or the foot brake. i put a multimeter to the connections from front to back, and as far as i know i'm doing that corectly. Everyhting showed 12 volts when i tested. i'm going to change both bulbs, as ther ewas a little bit of corrosion on each. i metered the integration box, which seems to be reminiscent of what would be used to put brake lights and signals to a trailer, and the power is good in both directions. I'm confused, and got a good buzz off a 6 pack while sweating this out in the vegas heat, so i figured i would call upon the gods for some heavenly assistance. any ideas or reccomendations appreciated. thanks.