Kawasaki Ninja ZX Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter · #1 ·
My new bike has an Akro slip-on on and I was wondering if it required a power commander to make it reach its full potential. I dont know a whole lot about power commanders because my last bike was an 05 V-Star 1100. My bike seems a little hesitant when I am cruising in 6th on the highway.
 

·
Registered
Joined
·
21 Posts
wrong, i also was wondering about at power commander for my bike also. i have a 06 636 with a muzzy'z slip-on and the guy at the local powersports place told me unless i had a full exhaust it would be a waste of money....
 

·
Registered
Joined
·
10 Posts
I added a Akrapovic slip-on but no PCIII to my 06 636 and the bike ran fine and it was a little stronger. When I added the PCIII and had a custom map made it added 3 hp and accelerated stronger and ran smoother. But the best mod I did was the Jumper mod. Although on the dyno the Jumper mod only added a little over 1 hp the bike held it's max hp all the way to the rev limiter before it would drop off.

On my ZX10r the PCIII made a bigger difference adding almost 5 hp with a custom map...
 
1 - 7 of 7 Posts
Top