Kawasaki Ninja ZX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
201 Posts
Discussion Starter · #1 ·
Just a couple of quick questions regarding interchangeable parts?
1.) I was wondering if their were any performance gains to be had by replacing the exhaust cam with an intake cam on a ZX9R?

2.) Can a ZX6R swingarm be put on a 9R?

Thanks for any input you may be able to give. Looking for a competive edge for next seasons Drags.
 

·
Registered
Joined
·
46 Posts
I dont think that would work. If anything, you would have to seriously degree the cam by almost 180 degrees. I dont think you want your exhaust valves to open up that much. You actually need a little bit of back pressure.
 

·
Registered
Joined
·
14 Posts
A lil info about GPz motors.You might want to put on a ignition advancer. they like the timeing bumped up a little.they are hot natured motors and liked to be ran hard.KEEP GOOD OIL in it because they have a oiling problem That kawasaki knows about and will not fix.They will throw the #2 rod if its low on oil.put A good full system and have it jetted and it will run like a diffrent bike. The zx9 is a real fast bike. I ride a zx12 and i would not mind parking one in my driveway.I can give you more info. just p/m me and I will give you my cell #.
 
1 - 3 of 3 Posts
Top