Kawasaki Ninja ZX Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Whats good ZX? ive recently purchased a 95 zx9 and while doing an oil change (taking the filter out) the old and stiff/brittle line cracked all over. i finally managed to get the allen screw open, which was a bit:rant! now am i able to use the same fittings and a new oil hose in it? ive looked all over for info but dont know? seen the whole assembly for $181 to a used one on ebay for $20, but i guess they're crimped on? THANKS :smile
 

·
Registered
Joined
·
249 Posts
those parts are hard to come by on hear. usually the engine gets sold as a whole. sucks no one could help you out but trust me when i say iv always gotten good help here. you also just missed allll the parted out bikes that were being sold maybe 2 months ago. just bad timing. if you ever need help with anything be sure to ask here.
 

·
Registered
Joined
·
249 Posts
if you have enough hose on either end to connect to a new hi pressure line then im sure you can, just have to seal it very very well. epoxy might work
 
1 - 5 of 5 Posts
Top