Kawasaki Ninja ZX Forum banner

Need feeler guage help

1902 Views 11 Replies 4 Participants Last post by  oldhead
Well the book has exhaust 0.22-0.31 mm (0.0087-0.0122 in)
intake 0.11-0.19 mm (0.0043-0.0075 in)

I have two sets of guages and the thinest is .0015 in / .038 mm

That is already paper thin what they are calling for must be see through. if its not a miss print where do i get a set of feelers that thin
1 - 4 of 12 Posts
Ok I think I got it. Musta spent too much time looking at that whore quiz
I'm guessing what threw me off is the extra number on the in measurement and the lack of on the mm measurement. Had a crs moment.
1 - 4 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.