Kawasaki Ninja ZX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I made a manometer it me laugh, I cant help it … It does its job sweet. To sweet. Just keep plenty of fluid in the tube. Or it will bubble
I used one-quarter inch tube with aft. Filled At least 12 inches up each side of a 36 in post-used 3 /16 tube to the carb. Despite what u hear the carb tube length does not have to be the same. U are trying to equalize pressure… volume does not matter
 

·
Registered
Joined
·
381 Posts
Nice work. I wouldnt be suprised to find out that not too many people know what a manometer is. Where did you hook it up too?
 

·
Registered
Joined
·
582 Posts
If you're lucky to lay you hands on a couple of lbs of mercury, it works well.
Smaller diameter tubing would be needed though.
gammac
 
1 - 3 of 3 Posts
Top