Just say hi.
1 - 6 of 6 Posts
Joined
·
1,623 Posts
glad your on the forum. I want to see pics of your entire motorcycle lineup, please.
Joined
·
14 Posts
The almighty ZX-11 rules! Good to know there are others who believe as I do. This was the bike that started everything in the modern age. True aerodynamic development, RAM AIR yea!!!, and the ability to be an everyday rider but still the most fun you can have with your clothes on!
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
Should I use some gasket sealer on my Clutch slaver cylinder?
ZX-11 ForumSo I am getting close to firing this thing up !! I put the clutch slave cylinder back on and this thing was dripping fluid like when I started to bleed the system. I am looking at the manual and I am hoping that the cylinder needs to go on EXACTLY just like the pictures in the book.... or I...- 13
- 197
-
Jet sizes for 1991 zx11c
ZX-11 ForumHi. I've had my zx11 for two years. When I cleaned the jets about a year ago I noticed they are all 160. Pilot jetsare #38. I have a hiflo brand air filter and a full muzy 4 into on exhaust system. It runs pretty good, but I'm not sure I'm getting optimum performance. Should the bike have 162...- 1
- 51
-
Weird question about ZX11 C model - and front headlight
ZX-11 ForumI am trying to do some custom work for a front headlight on my ZX 11 When I turn the key on, I am not getting voltage from the front head light wiring. But I remember some bikes need the bike to be running or at least hit the start button before the front headlight comes on. Is that the case...- 3
- 52
-
Loose connections/ Hanging idle
ZX-11 ForumAnyone know what these connections do or where they go? Also have a hanging idle around 3k rpms. Recieved my 94 ZX11 from a friend who was ready to let her go. After sitting for two years and losing nuts and bolts to his other projects, I went through her and ordered most of the missing pieces...- 18
- 409
-
lafave132 · updated
-
Crank differences C&D ?
ZX-11 ForumHi guys, I did a search but did not find the answer I need. I apologize because I know it has been covered, but can someone tell me the what the difference is between the two cranks in regards to interchangeability? I'm thinking of rebuilding my '96 D model engine which has rod knock, and am...- 5
- 173
-
M.Rad. · updated
Join now to ask and comment!