Kawasaki Ninja ZX Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
82 Posts
Discussion Starter · #1 ·
I just burnt out my clutches on my 02 zx6r and iam getting ready to put some new ones in. I was wondering if there is a way to identifiy which plate goes first ?
 

·
Banned
Joined
·
528 Posts
hey man remember the same way they came out the same way u put them back in, pay attention to every disc and also it won't be a bad idea to measure the thickness between all of them
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #3 ·
how much space should there be in between? it doesnt make a difference to what friction you put on first?
 

·
Banned
Joined
·
528 Posts
how much space should there be in between? it doesnt make a difference to what friction you put on first?
your best bet is get your self a manual and do it right if you are going to be doing it your self
 

·
Registered
Joined
·
683 Posts
Don't pump the clutch while its apart. Before you put the springs back in, pull the clutch lever all the way and zip tie it to the bars.
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #6 ·
thanks for all the response's i will hopefully be getting my clutches tuesday or so and i will use all the hints .
 

·
Registered
Joined
·
82 Posts
Discussion Starter · #7 ·
i got the clutches in just fine but its been like a month and come to find out i cracked the whole housing everything is warped about the housing. how did this manage to happen? i did have a lil problem of which way the rod that goes in between the clutches go. whether the spring goes before or after the seperator on the rod. so i was just wondering how could this have possible happened?
 

·
Banned
Joined
·
528 Posts
hey i have a brandnew set of ebc clutch springs for your bike, they are 10% stiffer than the oem 1's and they have a more positive feel and less missed shifts to, if your interested 15.00 Tyd for them and i have pay pal, great mod to do when u change your clutches bc over time your springs will weaken, let me no
 

·
Banned
Joined
·
528 Posts
let me no
 
1 - 10 of 10 Posts
Top