Kawasaki Ninja ZX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
I have a 95 ZX11 that took a 3rd rod crap. I am getting ready to rebuild the motor and would like to know what to rebuild with... I have heard that the rod bolts from Kaw suck, but I also heard that the crank sucks also. So, what should I do? I can get a new unused Kaw crank for cheap or have falicon do mine. Also callirro rods? But they are 3 times the amount of stock ones... And the oil pan - Muzzys or have Mr. Turbo redo mine or neither?

HELP!!!!!
 

·
Registered
Joined
·
15 Posts
I feel ya. I just got a 94 ZX11 that spun the bearing on #3 after 4 days of riding (must be a weak link in #3). I think I'm going to look for a wrecked bike and just swap engines. I don't have time to rebuild.
Does anyone know of one on the west coast? Or, someone who can Frankenstien this engine back to life?
 

·
Registered
Joined
·
50 Posts
Discussion Starter · #3 ·
I just found a rebuilt with big bore kit. I think SAC-cycle.com has one in Sacramento. Good luck...
 
1 - 3 of 3 Posts
Top