Kawasaki Ninja ZX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1 (Edited)
I goofed and figured out myself thru process of elimination that I wasnt holding the washer right for the 8 metric bolt to go in. They are the same size bolt just a different head on it.... -.- Everything needs to be torqued? what would be the right foots pounds? I wondered if anyone could give me a quick answer im having trouble looking it up and get a straight answer. im reading 4.3-7.2 pounds

https://skydrive.live.com/?cid=2e0f...#cid=2E0FA8AF0560C269&id=2E0FA8AF0560C269!128

or should i just upload the picture here? Dont remember if theres rules on links its been a while
:eek:hno
 

·
Registered
Joined
·
147 Posts
I just put my sliders on yesterday. The proper torque for that bolt(on my 2008) is 33 foot pounds. (strait from the service manual) It should be the same for yours as well.
No way on God's green Earth would you ever torque an engine mount to 7.2 foot pounds.
...Unless of course you actually WANT your engine to fall off while you're riding.
 
1 - 2 of 2 Posts
Top