Joined
·
1,623 Posts
Everywhere is getting the new 10R in...
1 - 2 of 2 Posts
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Gen 1 overhaul
ZX-10R ForumGuys.. Thought I'd let you see what I've done in the 5 weeks since buying this tired 2 Owner 16,500mls Black 04. This is my second one the last was mint and I wished I'd never got rid of, however I traded her in for my HP4 Competition in 2015 which i still have. On the surface the bike looked...- 0
- 5
-
What R1 Calipers
ZX-10R ForumGuys I've just bought a 2004 ZX10R. The guy I bought from had fitted a set of R1 Calipers which I've yet to look at/overhaul. Any idea the likely year the R1 Calipers came from..I'll need to look see if theres a part number on them. Cheers in advance. Stu Sent from my SM-G975F using Tapatalk- 2
- 136
-
Sputtering
ZX-10R ForumI have a 2012 zx10r and under heavy throttle in 1st it sputters around 7500k rpm only does it in first under heavy throttle and occasionally when I'm running out wide open in 6th gear... Bike had 25k on the clock I'm assuming all original coils and plugs... I've done the water test and the...- 2
- 22
-
Gen 1 Clutch cable guide
ZX-10R ForumEvening all, hope everyones keeping safe and well. Gradually working my way through this tired low mileage 2004 and now at the front end, whipped off all the plastic, replaced clutch cable and starting to put everything back together...prior to removing the fairing I noticed on left lock the...- 0
- 15
-
Fairings/cowlings
ZX-10R ForumI can't find the part number for the two plastic pieces that go directly under the tank on left and right side the left side house's some electronics anyone know the name of these plastics I'm looking for factory ebony ones it's the one with the bigger piece of grip pad on it.. the tabs back by...- 3
- 136
Join now to ask and comment!