Kawasaki Ninja ZX Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Was wondering if anyone knew where I could get my hands on a video or step by step instructions on how to replace my clutch plates, entire clutch set up? My 03 zx7 shifts (jumps) into first gear and the only feedback I've gotten is to replace my clutch plates. I've never done this before but I'm pretty good with fixing my own stuff. Any advice would be great, thx to all.:crazyloco
 

·
Registered
Joined
·
1,761 Posts
its actually pretty easy. drain the oil, take off the clutch cover, undo 6 hex bolts holding the springs. the cover will come off and then the plates will slide off...
 

·
Registered
Joined
·
1,761 Posts
you might also want to try bleeding or even replacing your hyd clutch fluid, there may be some air in it somehow. last spring during reassembly after overhaul, i somehow lost all pressure on my clutch lever, bleed out all the fluid and it worked like a charm
 
1 - 3 of 3 Posts
Top