[mrjingles]

Hi, fellows!

My stock brake pads are off. I've changed it on the strange brand 'REF'. And its work on the track worse and worse after each lap actually. It makes me sick.

What kind of brake pads do you prefer instead of OEM pads of Tokico?
Thanks.

 

[redmonster]

EBC Sintered Brake Pad Front - FA417/4HH

EBC Rear Sintered Brake Pads FA19 / 2HH

best ever, a little on the costly side but feedback from these is second to none.

 

[Shifty1]

+1 I only use EBC HH pads.

 

[Zippo475]

I just ordered EBC HH pads for my bike as well.

 

[oldhead]

What everyone else said. I have them and they work great. And make sure you break them in. To do this you need to break in short easy bursts for the first 20 or so miles, or 10 to 20 stops. If you break hard right off the get go you may glaze them over and then they won't stop worth a crap. Kinda sounds like thats what you did to the other pads

 

[reverev313]

EBC HH i found fronts and backs on ebay for 70 buck for the entire set cant wait to try them

 

[mrjingles]

Does someone used its on the track? How it is?

 

[mrjingles]

And does anyone tried the Nissin sintered (ST) pads? I can buy it from local dealer by $91 per one caliper set. It's expensive in compare with EBC HH.
Has any sense for overpay for it?

 

[oldhead]

Does someone used its on the track? How it is?

I use the HH'S on the track, no problems

 

[mrjingles]

What about Brembo 07SU26SA?

 

[mrjingles]

I couldn't find EBC HH in stock. The Brembo pads cost too much. I found and put the Galfer's 1054 pads. It is fine. Better than REF :smile

 

[redmonster]

this ebay shop is cheaper than EBC direct.


fitted and stopping now......

http://www.ebay.co.uk/itm/261054299203?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.co.uk/itm/251088517021?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649