Kawasaki Ninja ZX Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
418 Posts
Discussion Starter #1
Is it possible to stack two heli risers? I am thinking you would run out of fork, but has anybody tried it? Thanks
 

·
Registered
Joined
·
133 Posts
Seems like it would be unsafe.
 

·
Registered
Joined
·
773 Posts
also the handle bars and associated hardware would hit the flyscreen before full lock.

1 set of helibars barely clears the brake master and flyscreen when turning hard left slowly
 

·
Registered
Joined
·
128 Posts
Unsafe and why would you do this...Just mod your seat by shaving it down and get one set of heli risers that should help you out
 

·
Premium Member
Joined
·
13,118 Posts
IF you use longer, grade 8 bolts, and IF the cables and lines are long enough, and IF you can deal with the issues of things hitting the fairing corners, it should be fine. Like any other mod, if done correctly, safety is not a problem. I know several people who have double-stacked Genmar risers on their ZZR 1200s and those are 1 1/4" each, so doubling the 3/4" Helis should pose no safety issue if you use the proper fasteners.
 
1 - 5 of 5 Posts
Top