Kawasaki Ninja ZX Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
need to know small resistor value inside ignition switch and having a problem with plugs fouling out.there is a black wet soot on them and they will not fire.
plugs seem to load up when idling.cleaned low speed jets with carb cleaner and small piece of wire.been though carbs and replaced ignition system.did not replace any carb parts,just cleaned and inspected.bike was in storage for six years.ran well before storage.
 
1 - 1 of 1 Posts
Top