[Sh4dowsJudgment]

http://www.zx-10r.net/forum/showthread.php?t=102827

Title says it all, I did it and checked my codes, no servo code. So seems to work pretty good. Save yourself $70 on a servo buddy and just make one.

 

[MDeezy]

good find! This will save me a load. Just bookmarked the servobuddy site yesterday and was planning to order so i can have it when I get my exhaust.

I'll just make one up tomorrow.

 

[Sh4dowsJudgment]

now this also works on ZX10's 04-10, Not sure if it works on the same year 06's. I just know those years use the same servo.

 

[MDeezy]

now this also works on ZX10's 04-10, Not sure if it works on the same year 06's. I just know those years use the same servo.

what?


the link takes you to the 10r site but if you did this on your 6r with sucess then I should be golden also

 

[Sh4dowsJudgment]

I know... I was just stating for people looking at a first glance so they dont have to read all of the comments on the link.

This works for all ninjas using the same servo motor as 05-06 ZX6R's

 

[MDeezy]

sweet

 

[KingCrabb]

I just tried this and it did not work for some reason... ill de solder everything and re do it see if anything changes.

 

[BlowerWhore]

awesome. im going to do this!!!

 

[CrackerX]

i make and sold servo eliminators waterproof and good price
ebay Item number: 320862573761

http://www.ebay.com/itm/320862573761?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

 

[Sh4dowsJudgment]

It does actually work, read here, http://www.zxforums.com/forums/zx-6r-forum/58717-servo-eliminator.html

Apperently you have to ride a little bit so the capacitor can charge up. Or if you dont like that you can dish 20 bucks to the guy above.

 

[Penrod]

I just did this for my code 63, but after plugging in and starting I got a code 34. Got the work around for the exhaust part of it?

 

[ZX10R FOOL]

http://www.zx-10r.net/forum/showthread.php?t=102827

Title says it all, I did it and checked my codes, no servo code. So seems to work pretty good. Save yourself $70 on a servo buddy and just make one.

That's my thread over on ZX-10R.net / Hellsrazor

That design ONLY works on the 2004-2010 ZX10R's.
It does not work for the ZX6R's or Gen 4 ZX10R's.

I DO have a working and proven design for the ZX6R's and Gen 4 ZX10R's.
PM me if interested.
They are $34 shipped to your door with delivery confirmation.

 

[1275783]

This video will show you how to make your own Servo Eliminator for ZX6R

https://www.youtube.com/watch?v=dy8fgW9vVQA

 

[JoshKO]

Thanks for the link.