Kawasaki Ninja ZX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
hey just wondering if anyone would know whats goin on..my fi light stays on after i start my bike. whats possibly wrong with the bike? and what do i need to check or do to fix it? thanks a bunch.
 

·
Registered
Joined
·
320 Posts
Lose orange wire under the seat that's not connected to anything. Turn bike key on engine not running and ground that wire. Count the flashes and that's your service code. Pull it and post back. Ground te wire and hold it for service mode 1 (current codes) dealer mode 2 you tap the wire on the ground 5 times and hold it to ground on the fifth tap. This gives you history codes. Just take a piece of wire and connect it to the frame to ground it.
 

·
Senior Member
Joined
·
11,782 Posts
Yeah, there are a ton of reasons why that light would be on. Pulling the codes is the best way to find out. Post your code and we'll see what we can do.
 

·
Banned
Joined
·
3,608 Posts
Hey if you need help with this I live in Bradenton so send me a PM and we can meet up. I work at the taco bell on 41 and 60th west so you'll see my 7 there most days.
 
1 - 4 of 4 Posts
Top