I was putting my kickstand down last night at autozone and as I was doing it my foot slipped and I dropped the bike on it's left side, and it broke my radiator where the hose connects to radiator and broke shifter off too. So I buy some J-B Weld epoxy what kind of mix which is black and white it gets hot as you mixing it so I put it on there then later after I clean it real good and then you put one sheet of the mesh when you put another layer of the house Debbie lot epoxy I put the rubber hose back on Earth after about an hour and a half but it did Ben that nipple come out for the radiator and that's where this weekend but it stopped delete all the way down to just need to be the drip where the hose clamps onto the nipple turn off the radiator and I'm thinking with this is because the metal are the nipple is being squeezed in a little bit egg-shaped so therefore the clamp doesn't want to mold to it anybody help me here I'm about to upload pictures. Thanks guys.
lockhartshawn1988
1997 kawasaki ZX900R Radiator leak
That's sucks... That would've made me feel like a donkey.
Anyways, I would be frantically searching for a replacement radiator.
Anyways, I would be frantically searching for a replacement radiator.
That's a common failure spot for the radiator when dropped, you should be able to find a replacement fairly easily though.
Replacing it will probably eat up a day though.
94-97 KAWASAKI NINJA ZX9R ENGINE RADIATOR MOTOR COOLER COOLING RADIATOR | eBay
<p>94-97 KAWASAKI NINJA ZX9R ENGINE RADIATOR MOTOR COOLER COOLING RADIATOR, HORN and Thermostat , JUST AS PICTURED </p>
www.ebay.com
Replacing it will probably eat up a day though.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
