Kawasaki Ninja ZX Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Hey guys, got this 06 636 and the problem is with the clutch

The problem is going from N to 1st bike jerks forward like its still in gear, doesn't die just jerks a little. Also when going to a stop I can hear the clutch make a noise in neutral.

Too me, sounds like a sticking plate, the owner before me says it hasn't ran for a couple of months and oil was also pretty dirty when I did a change.

I'm use too the 750s where it was hydro clutch and such.

Just trying to get a opinin and where to go from here.
Thanks
 

·
Premium Member
Joined
·
11,231 Posts
Depends how much it jumps for starters. And how the clutch is actuated doesn't change how the clutch works, so there shouldn't be a big difference between cable and hydraulic.
 

·
Registered
Joined
·
48 Posts
I have a similar problem. Only mine I think is a clutch not fully disengaging. In gear with clutch pulled all the way it will still move forward and I have to hold brake. Sucks at stoplights cuz if I don't get to neutral before I stop I can't get it out of gear and I have to fight it from rolling into a car in front of me. Pretty sure it's cuz the clutch is so worn I have it adjusted all the way out. But have a new clutch on the way so hopefully that fixes it


Sent from my iPhone using MO Free
 
1 - 3 of 3 Posts
Top