Kawasaki Ninja ZX Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Mechanical & Technical
    i need a little help. im still green when it comes to mechanics and im learning as i go. my ninja clutch was shutting down as soon as i kicked it into gear. i drained the oil and whatnot got the case off, my actuator arm is shredded. i got a new one coming. my questions are what would cause...
  2. Mechanical & Technical
    Hi guys so I have this loud knocking or rattle noise that gets louder with the rpms. If you pull in the clutch lever the noise is completely gone when you let go or idle on neutral it gets loud again. So far ive replaced my clutch basket, plates thought it might be the rivets or springs but the...
  3. Mechanical & Technical
    Hey guys, first post here. I did some looking but I couldn’t find anything related to what happened to my bike. I was riding home from work the other day (normal temps, good fuel, etc) and my bike makes this chattering clunking sound while cruising in 4-5 gear and there was no power to the wheel...
  4. Mechanical & Technical
    I took my 2018 ZX14R to a local mechanic after I found the clutch was biting in different spots on the lever and would sometimes not bite enough and lugged the bike from a stop but didn't seem to slip anywhere else. After he completed the work, I was told that he found the judder-spring in the...
  5. Mechanical & Technical
    I recently bought a 636 and the man i bought it from said he snapped off the push rod and id have to get a new one. I got a new one and re assembled it but the clutch is too heavy and wont engage. snapped the new part again. The bike is stuck in first gear and apart from not being able to shift...
1-5 of 5 Results
Top