I would sell my L for it. But then I'd have to part out a custom sbm engine and that would defeat the purpose of having a sleeper. Plus I already have aftermarket fcrs. Only thing I'm missing is the M frame and close ratio trans.
Sir Rag Filterin', Long Ass Waitin', Assless PJ Wearin' Post Whore of ZXF
1993 "zxr750" REobtainium
1996 zx7r P1(aka Zombiehorse)
1993 zxr750 L1(Totaled/donor bike)
2010 250R(Voluntary Repo..)
Look at the swing arm pivot. Only M's and N's had that adjustment block. I have some fairly detailed pictures of my 93 M in one of the threads in my sig. Look through them if you want.
Thanks for the info.
I live almost in walking distance. I'm going to call them tomorrow and take a look. What should i be looking for to make sure it's a N model = ZX7RR ?
I wouldn't recognize the swing arm pivot if you didn't mention it, anything else i should ask or look for to confirm?
Does it still have RR (N) model more adjustable forks and shock?
Does it still have the RR cdi (three outlet), P model had two.
Does it still have std 41mm flatslides (with two accelerator pumps) or aftermarket flatslides, or CVDK?
Original motor? With RR crank that has removable gear on end? Easy way to tell.... Pull ignition cover, remove ignition rotor, look at timing gear on end of crank... Is it removable and held in place by splines(RR crank) or one piece with crank (std P crank)? Also likely to still have close ratio Gearbox if it has RR crank and original motor.
RR swingarm? Look for two pairs of holes on either side under adjustment blocks for mounting lift hooks...
I could go on.....