04 zx10 headache - ZX Forums
 
LinkBack Thread Tools
post #1 of 6 (permalink) Old 07-10-2019, 01:07 AM Thread Starter
Newbie
 
Joined: Jul 2019

Posts: 5
04 zx10 headache

So I have a 04 zx10. I washed the bike and let it sit for 30 mins like I always do. Well it started just fine at first. Then it started sputtering and cut. Now it will not start back up. It is throwing almost every code related to a sensor. Can anyone shed some light on this or possibly point me in the right direction on where to start diagnosing
Pyscolilboy18 is offline  
Sponsored Links
Advertisement
 
post #2 of 6 (permalink) Old 07-15-2019, 08:13 PM
Member
 
Twistedsocal81's Avatar
 
Joined: Apr 2017

Posts: 40
sounds like you got the ECU connections wet. Make sure it's turned off, disconnect the negative battery lead, then unplug both of the multi pin connector bundles off of the ECU, use a can of compressed air or even a shop vac and either suck or blow all the moisture out of both the ECU and the connections. leave the seat off and aim a fan or use a hair dryer and blow on the connections on ECU and wires for a few hours with fans or about 5 or 10 min with a hair dryer. best would be to wait over night before starting it back up but that should solve the issue
Twistedsocal81 is offline  
post #3 of 6 (permalink) Old 07-16-2019, 07:35 PM Thread Starter
Newbie
 
Joined: Jul 2019

Posts: 5
It has been over a week. Still same issue. It throwing code 11 12 13 32
Pyscolilboy18 is offline  
 
post #4 of 6 (permalink) Old 07-16-2019, 08:12 PM Thread Starter
Newbie
 
Joined: Jul 2019

Posts: 5
It has been over a week. Still same issue. It throwing code 11 12 13 32
Pyscolilboy18 is offline  
post #5 of 6 (permalink) Old 07-19-2019, 06:46 PM
Member
 
easyrider4's Avatar
 
Joined: Oct 2018
From: Myrtle Beach, SC
I Ride: 2007 Kawasaki ZX-14

Posts: 31
You might want to check out a You-tube video on the valve problems the 04 to 06 zx-10 models have. The pieces of metal that hold the valve springs are too thin and they are breaking . Kawasaki corrected this with the 07 model by making the metal pieces thicker. The 04 thru 06 zx-10 models are to be avoided.
easyrider4 is offline  
post #6 of 6 (permalink) Old 07-20-2019, 12:37 AM Thread Starter
Newbie
 
Joined: Jul 2019

Posts: 5
I've read about that but that's not the problem with why it will not start. This is electrical for sure. I'm pretty sure I've fried the ECU.
Pyscolilboy18 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ZX Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome