My '99 P4 ZX-7R, for your delectation:
Ok - it may be mostly standard but it has some useful mods:
Fabbri double bubble screen
45t rear Talon sprocket
Home made chain guard
SRAD 600 4 pot brakes (a bit fierce - I now need new discs)
Kit MCCT courtesy of CCMHUNT (cheers)
All Balls fork kits - air gap reduced by 10mm using Shell Advance 5W oil (compression and rebound reduced by 2 clicks otherwise it jacks down)
Front ride height increased by 4mm
Rear ride height increased by 12mm
Front sag 25mm
Rear sag 10mm
Home made 4 degree advancer to compensate for the 4-1 caused flat spot
Stainless 4-1 (unknown brand but very very light)
Float bowl mod + Kleen removed
Reed ports welded in cam cover, tubes tapped and plugged with m8 grub screws
Cam cover painted black - to hide the welding discolouration, oops.
I have also wired a low beam relay in for the upcoming HIDs (uk models don't have one fitted as standard) + the reflectors have been cut to accept H4 bulbs.
Aluminium rubbing strips on the can (because I keep scraping it getting it in and out of my tiny shed)
It was bought for me by my wife (she got a very good deal) for my 50th.
The (very expensive) alarm has been removed and hit with a very big hammer, then stomped to bits (it caused intermittent starting problems)
Clutch switch bypassed
Side stand switch bypassed
Grab rails polished
Netting pillion pad cover - to cover up holes made by a cat that has adopted it for some strange reason - see below
In the last 8000 miles it has got through 3 front & 2 rear tyres, & I have enjoyed every second of ownership (apart from the alarm - see above).....
By the way, animal lovers, I did not stick the insulating tape to the cat....anything that drops on the floor she either rolls in or eats....which was fun when I had a Nitron Shock stripped recently...it took me ages to find all the shims as they got stuck to her. Even now I'm not sure I found all of them, *^%#ing cat (I love it really), which is why that shock is not fitted.