|Topic Review (Newest First)|
|02-12-2013 05:42 AM|
|christikitty||Yeah that cut nut would have done it LOL. Good catch.|
|02-11-2013 04:49 PM|
|02-04-2013 06:19 PM|
|02-04-2013 06:17 PM|
One of the crazier things I've seen
Thanks for posting the progress.
Let us know how it turns out
|02-04-2013 06:11 PM|
and here is a new one i found a picture of. Notice how much longer it is.
That looks like the problem. I guess i'll have to see if the shop has that tomorrow. I'll let you all know how that goes. Thanks.
|01-29-2013 06:54 PM|
|01-29-2013 11:07 AM|
|01-26-2013 05:27 AM|
|christikitty||That works. Yes if you are missing the spacing washer to kick that nut out then it won't have the correct clearance and will not work. I forgot those had one cause it's been a while since I worked on one.|
|01-25-2013 08:25 PM|
As for testing the SS.The manual tells me i need power to test it like that, but it wants a little harness tool that makes it way easier. I can't tell if i'm ever doing it right. The guy at the dealership has the tool i'm assuming and is only gonna charge me like ten bucks. I'll just bring my pile of speed sensors down and have em check it out.
|01-25-2013 07:01 PM|
|christikitty||Yeah you need the lock washer on there to make sure the nut doesn't take a vacation. It goes under the nut then you bend it over. You can test the sensor yourself though. take an ohm meter, and connect it to the wires. Then take something metal and it should cause a change in the reading. Not sure what the resistance should be but a service manual should tell you.|
|01-25-2013 04:47 PM|
Before I get on to electrical I have noticed a couple things that are missing. The lock ring, that I hear about a lot on videos of people trying to replace their sprockets, but also a washer type thing. If you see here on this website.
If you look at part number 92200c, it doesn't seem that i have that part on my motorcycle. Could it be that without that washer and lock washer that perhaps the nut doesn't stick out far enough for the speed sensor to collect a signal? Any thoughts? I'm getting the speed sensor tested at the dealership on Monday, just to make absolutely sure it works, even though i've gone through 4 and they all seemed fine.
|01-25-2013 08:41 AM|
|christikitty||It's right. I would start tracking down wiring now. Mechanically it's right. is there supposed to be a magnet that screws into the sprocket nut? Or is the sensor magnetic? I don't remember. It looks like your chain is rubbing on something too.|
|01-25-2013 08:13 AM|
|01-24-2013 06:59 PM|
|christikitty||The speed sensor works off of a magnetic switch. A hall effect. Now there has to be something there for the sensor to pick up the signal from. Either ribs on the circumference of the sprocket, or I have seen sprocket nuts with a square "crown" that the sensor reads from. I'm pretty sure you have the wrong nut. Can you post a pic of what you have setup as it may help us out a little bit. My money is you have the wrong sprocket nut on it and that is why it wont pick up the signal the ECU needs to send the pulse signal to the speedo head.|
|01-24-2013 06:33 PM|
|01-24-2013 05:05 PM|
This is only what I've heard and not even sure how true it is.
Guys would fill in one the holes in the 14 front sprocket to throw off the speed sensor and eliminate the 186 mph limit.
Not even sure why I posted that since I could be way off.
|01-24-2013 04:49 PM|
|jager62||Okay. I took a gander at the sprocket. No holes. So that got me wondering, and I called up the local motorcycle shop. They mentioned it could either read off of the sprocket or the sprocket nut. So I did a google search and on zx6r forums they show little marks on the sprocket nut that are meant for the hall sensor, which i'm assuming is another name for the speed sensor. So I gotta know, is it the sprocket or the nut that the speed sensor reads off of? I see sprockets all over with holes and some without. He did mention it could be backwards and there could be a strip with magnets in it on the sprocket that could do the signals. I'm really confused here! Even his dealer book didn't show what did the actual signaling for the speed sensor.|
|01-24-2013 11:40 AM|
|01-24-2013 11:35 AM|
see the holes in the sprocket? I said notches.
|01-24-2013 11:11 AM|
|jager62||Do any of you have an example of what it should look like so that I could compare it with the one on it and see if it is incorrect or simply put on backwards.?|
|This thread has more than 20 replies. Click here to review the whole thread.|