ZX-6R 06 Valve clearance - ZX Forums
 1Likes
  • 1 Post By quisp
 
LinkBack Thread Tools
post #1 of 2 (permalink) Old 11-21-2019, 10:07 AM Thread Starter
Newbie
 
Joined: Nov 2019

Posts: 1
ZX-6R 06 Valve clearance

Hi guys,

I'm trying to do my first ever valve clearance check. How important is to have the 1st pinston in TDC- position? Or is the measured dimension valid, if the shaft is not "pushing" the valve. Since the diameter on that "not touching" area is the same on all positions. Or is it relevant on what position the piston is?

Please see the image below, I took the measurements while I rotated the shaft to achieve these kind of positions:
https://www.zxforums.com/forums/atta...=11182&thumb=1


Some tutorials (like service manual) said that shaft should have a one certain position. Some tutorials said it really doesn't matter, if the gap is at it's largest position nad shaft is not pushing the valve. And some say it must be pointing outwards from the engine...

I got the following clearances with this method, not sure if I did it correctly or not...
https://www.zxforums.com/forums/atta...=11184&thumb=1

I hope you understand what I'm trying to ask :D
Attached Thumbnails
Click image for larger version

Name:	valve.png
Views:	11
Size:	27.0 KB
ID:	11182   Click image for larger version

Name:	valve_clearances.png
Views:	8
Size:	4.0 KB
ID:	11184  

Last edited by nwoot; 11-21-2019 at 10:13 AM.
nwoot is offline  
Sponsored Links
Advertisement
 
post #2 of 2 (permalink) Old 11-21-2019, 04:41 PM
Senior Member
 
quisp's Avatar
 
Joined: Apr 2012
From: florida

Posts: 886
Pointing directly away is what you want. There's "quieting ramps" that ease the valve open and closed . is it hard to get to the indicator on the ignition rotor ?
Strider likes this.
quisp is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ZX Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome