ZX Forums - View Single Post - P model race Crank and P model carbs with Dynojet kit for sale.
View Single Post
post #1 of (permalink) Old 12-25-2018, 03:53 PM Thread Starter
Turbo329
Senior Member
 
Turbo329's Avatar
 
Joined: Aug 2010
From: NYC
I Ride: 2002 ZX-7R; 1998 ZX-7R; 2005 MV Agusta F4 1000S 1+1; 2016 Ninja H2

Posts: 4,644
P model race Crank and P model carbs with Dynojet kit for sale.

Hi guys,

I have some old parts lying around from my 779cc build.

First, I have a lightened (by 4lbs), crankshaft that is polished and balanced to 14k rpm that I will let go for $100 plus shipping. The reason for it being sold cheap is because the journals are scored (damaged) from the time the bearing failed due to a disintegrated cam guide. There are some shops that do journal repair and they can cost $200-$300 on average. Even cheaper if you are handy and can do the work yourself.

Second, I have a set of P model carbs in decent condition with a dynojet kit fitted. There are no issues with the carbs and they were on my bike prior to the 779cc buildout. The float bowl gaskets need to be replaced. I'll let these go for $150 shipped anywhere in the USA. Otherwise $200 plus shipping if you want me to service them and replace the float bowl gaskets with K&L parts.

Just putting this out here to see if there's interest and will provide pics if there's enough interest.

98 ZX7R 140HP
Wiseco 779cc Pistons
Airtech SBK Airbox
Webcam Race Grind
Ceramic Cam & Trans Bearings
Slipper Clutch
14k Crank Balance
Kibblewhite Kit
TCIP4
Dyna Coils
Super Conductor wires
Sharkskinz
Koso Tach & Temp Sensor
Penske Rear Suspension
Racetech Fork Kit
MP QT Throttle & Cables
Keihin FCR41
SES Fairing Stay
EK3D 520 Chain Conv.
Vortex Clip-Ons & Renthal
Lithium Battery
Polished Exh Ports
Motul 300v

02 ZX7R
Dynojet
Muzzy Exh
BMC Race Filter
RaceTech Fork Kit
Turbo329 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome