Quote:
Originally Posted by DaveMK2
Anyone know where to find a single arm swing arm for the zx6r?
|
You should try getting a 94-97 VFR750F swingarm. They are pretty cheap on ebay. Make sure the VFR swingarm has the single dogbone pivot point and not the dual pivot points. The 94-97 swingarm is 8.5 inches wide so you can move it to the left side of the bike. The pivot hole is 20mm. So if your swingarm pivot bolt is 20mm your ok to use your pivot bolt to mount it. Should only take spacers to move the swingarm into position.
I have mounted 2 swingarms on 96 + 97 ZX7R's. And once I get my undertail done and the motor done on the other one I am going to do a newer ZX6R this summer.
Now about the pics. Love the last pic of the orange bike. What fairing is that? I have seen ZX9R front fairings on a 7R before.
And the first pic. My swingarm spacers should mount up to the 8R frame since the earlier 94-97 9R swingarms are the same as the zx7R swingarms!
-Frank
Ever seen a motorcycle parked outside a shrinks office????
