ZX9 fairing swap question... - ZX Forums
Reply
 
LinkBack Thread Tools
post #1 of 46 (permalink) Old 03-27-2010, 03:12 AM Thread Starter
Senior Member
 
Joined: Apr 2009
From: PG County MD
I Ride: 1999 Kawasaki ZX9

Posts: 174
ZX9 fairing swap question...

Will the right side fairing, left side fairing, belly pan, tank and V fairing from a 2000-2003 model ZX9 fit on a 1998 - 1999 ZX9????
Aboogie is offline  
Sponsored Links
Advertisement
 
post #2 of 46 (permalink) Old 03-27-2010, 05:16 AM
Senior Member
 
maut9r's Avatar
 
Joined: Jul 2009
From: Sherrard, Illinois

Posts: 182
Yes.
maut9r is offline  
post #3 of 46 (permalink) Old 03-27-2010, 10:29 AM
Senior Member
 
Joined: Jun 2009
From: WI
I Ride: 2012 zx10R, 1996 zx9r

Posts: 3,578
What about a 94 to 97?
jowek70 is offline  
post #4 of 46 (permalink) Old 03-28-2010, 10:49 AM
Senior Member
 
maut9r's Avatar
 
Joined: Jul 2009
From: Sherrard, Illinois

Posts: 182
Yes, 94-97 are identical except for the tail section had a hole added when they put the grab handles on them.
maut9r is offline  
post #5 of 46 (permalink) Old 03-29-2010, 05:09 AM Thread Starter
Senior Member
 
Joined: Apr 2009
From: PG County MD
I Ride: 1999 Kawasaki ZX9

Posts: 174
Thanks a lot.........
Aboogie is offline  
post #6 of 46 (permalink) Old 03-29-2010, 02:30 PM
Member
 
Bushmaster27's Avatar
 
Joined: Feb 2010
From: Kentucky
I Ride: 2001 ZX9R

Posts: 49
will the tail section off a 2002-2003 fit on an 01 and or will a 02-03 subfr,ae fit on an 01

Operation Flying Turd: It may be sh!t but its fast sh!t.
Bushmaster27 is offline  
post #7 of 46 (permalink) Old 03-30-2010, 05:14 AM
Senior Member
 
Joined: Jun 2009
From: WI
I Ride: 2012 zx10R, 1996 zx9r

Posts: 3,578
So the plastics from a newer zx9 will fit my 96? thats tight.
jowek70 is offline  
post #8 of 46 (permalink) Old 03-30-2010, 09:07 AM
Nal
Senior Member
 
Nal's Avatar
 
Joined: Jul 2008
From: Rio Rancho, New Mexico
I Ride: in my dreams...

Posts: 4,009
Quote:
Originally Posted by jowek70 View Post
So the plastics from a newer zx9 will fit my 96? thats tight.
no, unless you do some mods, and make custom brackets, I'm pretty sure the 96 is an entirely different frame

Sir USAF Asian Rican, Beer Guzzlin, Road Warrior Whore of ZXF
http://s860.photobucket.com/albums/ab167/NalSS9R/
http://www.facebook.com/nalmunoz
XBOX LIVE = NALSS9R
Nal is offline  
post #9 of 46 (permalink) Old 03-30-2010, 09:12 AM
Nal
Senior Member
 
Nal's Avatar
 
Joined: Jul 2008
From: Rio Rancho, New Mexico
I Ride: in my dreams...

Posts: 4,009
Quote:
Originally Posted by Bushmaster27 View Post
will the tail section off a 2002-2003 fit on an 01 and or will a 02-03 subfr,ae fit on an 01
ask e1 he's got both, http://www.zxforums.com/forums/zx-9r...-proposal.html

Sir USAF Asian Rican, Beer Guzzlin, Road Warrior Whore of ZXF
http://s860.photobucket.com/albums/ab167/NalSS9R/
http://www.facebook.com/nalmunoz
XBOX LIVE = NALSS9R
Nal is offline  
post #10 of 46 (permalink) Old 03-30-2010, 09:46 AM
Senior Member
 
Joined: Jun 2009
From: WI
I Ride: 2012 zx10R, 1996 zx9r

Posts: 3,578
Alright, the front fairing looks identical though, not sure about the sides.
jowek70 is offline  
post #11 of 46 (permalink) Old 03-30-2010, 11:29 AM
Senior Member
 
maut9r's Avatar
 
Joined: Jul 2009
From: Sherrard, Illinois

Posts: 182
OK here goes, 94-97 all the same except holes in tail section of bikes with grab handles. 98-03 same sides, belly, and chin pieces.
98-01 same front fender and tail section
98-99 same frame, nose fairing and windshield
00-01 same frame
00-03 same nose fairing and windshield
02-03 same frame, tail, seat, and front fender.

To put the tail from 02,03 on older bikes the subframe would have to fit, hopefully e1 can help you out.
maut9r is offline  
post #12 of 46 (permalink) Old 03-30-2010, 01:49 PM
Senior Member
 
Joined: Jun 2009
From: WI
I Ride: 2012 zx10R, 1996 zx9r

Posts: 3,578
Thanks for the info.
jowek70 is offline  
post #13 of 46 (permalink) Old 05-10-2010, 06:00 AM Thread Starter
Senior Member
 
Joined: Apr 2009
From: PG County MD
I Ride: 1999 Kawasaki ZX9

Posts: 174
Will the upper fairing of a ZZR 600 fit the front end of a 2000 - 2003 ZX9..........
Aboogie is offline  
post #14 of 46 (permalink) Old 05-10-2010, 06:03 AM Thread Starter
Senior Member
 
Joined: Apr 2009
From: PG County MD
I Ride: 1999 Kawasaki ZX9

Posts: 174
Aboogie is offline  
post #15 of 46 (permalink) Old 06-07-2010, 07:52 PM
Senior Member
 
seex9r's Avatar
 
Joined: Mar 2010
From: nj
I Ride: 97 zx9r

Posts: 234
Quote:
Originally Posted by maut9r View Post
OK here goes, 94-97 all the same except holes in tail section of bikes with grab handles. 98-03 same sides, belly, and chin pieces.
98-01 same front fender and tail section
98-99 same frame, nose fairing and windshield
00-01 same frame
00-03 same nose fairing and windshield
02-03 same frame, tail, seat, and front fender.

To put the tail from 02,03 on older bikes the subframe would have to fit, hopefully e1 can help you out.
any one know if a 98 front will fit on with the 97 sides? or u guys say a 98 and newer can fit on a 97 zx9?

Last edited by seex9r; 06-07-2010 at 07:56 PM.
seex9r is offline  
post #16 of 46 (permalink) Old 06-08-2010, 01:03 PM
Senior Member
 
maut9r's Avatar
 
Joined: Jul 2009
From: Sherrard, Illinois

Posts: 182
no and no
maut9r is offline  
post #17 of 46 (permalink) Old 06-08-2010, 05:27 PM
Senior Member
 
seex9r's Avatar
 
Joined: Mar 2010
From: nj
I Ride: 97 zx9r

Posts: 234
so nothing can interchange to fit the 97. i pretty much need it all
seex9r is offline  
post #18 of 46 (permalink) Old 06-09-2010, 11:23 AM
Senior Member
 
maut9r's Avatar
 
Joined: Jul 2009
From: Sherrard, Illinois

Posts: 182
The turn signals and the bulbs in the tail light will work.
maut9r is offline  
post #19 of 46 (permalink) Old 06-09-2010, 07:28 PM
Senior Member
 
seex9r's Avatar
 
Joined: Mar 2010
From: nj
I Ride: 97 zx9r

Posts: 234
ok thanks for the info
seex9r is offline  
post #20 of 46 (permalink) Old 06-12-2010, 05:03 PM
Newbie
 
Joined: Jun 2010
From: Baltimore MD

Posts: 3
Wondering

Im trying to find some aftermarket fairings (full kit) for my zx9r's (1995 and 1997) looked on ebay was not able to find full set. Will 98 fairings fit on either bike? Looked a place in Hong Kong that had several types.(but they only went back to 98)
Uncagedpittbull is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the ZX Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome