00-01to 2002 pipe swap

[peteylen]

does anyone know if a slip-on from a 00-01 fit a 2002 would like the d&d on this forum that's for sale any help welcomed thanks Pete

[KEEFFIE]

it should. the one below your post is for a 00-02 so it should mount right up.

[Goat]

I was under the impression that the 00-01 D&D would fit an 02-03...though after doing some research I've seen some that are bolt on, and some that are slip on. The stock pipe s from 01 to 02 are completely different, but the mounting points and hardware all look the same. So it should fit. Can anyone testify to the truth bout this?

[raized1199]

From what I see on these:

2001
http://fiche.ronayers.com/Index.cfm/...roup/Muffler(s)



And



2002
http://fiche.ronayers.com/Index.cfm/...up/Muffler(s)#

There is no difference for the bolt up.
And the head pipes are the same stock no also.

Id go for it Bro.

[Goat]

thanks 1199!!!

peteylen, like I said, I'm going to double check, but looks like it will mount up. I know that the mid-pipe mount from 01-02 might be a diff. set-up, but its all in the same place. The D&D is the can + the mid-pipe. The mid-pipe mounts to the main 4-1 header clamp and the exhaust itself mounts to the rear footpeg (obviously, duh, just making it clear!)

[peteylen]

got it today and it won't fit mid-pipe is same size as the header pipe even with a little work on the mid to make it fit the mid-pipe won't clear the swingarm trying to get intouch with goat today to tell him the bad news I read some place the 02-03 dad a bigger mid-pipe like from 2" to 2.25 for more tork maybe that's why it won't fit tryed everything and it's a no-go