Parting 97 ZX9R (B-series 94-97) : Kawasaki ZX Forums: Kawasaki Ninja Forum

Bluesteiner · 03-01-2008, 01:16 AM

Disclaimer: Please read the sold list before asking if I have a part. The list is kept updated. I will only respond to a personal email sent to my email, not a pm or posting. My email is:

scdc0713@gmail.com

I'm parting out my ZX-9R. It is a 97' which means all parts are compatible with 94-97 9R's, most 7 and 6 parts are compatible. Some parts can be shared with z1000's even (lighter cams, chains, ect.). Ask and I'll check part numbers to see. I'll be letting all of theses parts go for way cheaper than you can find at your local dealer or any internet site. Frame is clean but will not come with title if interested. Please look at all the pics and ask if you don't see anything as I'm still haven't posted some stuff and will post eventually.

Buyer will pay for shipping. Will ship internationally.

I've decided to part this bike out because the #3 con rod went out (a somewhat common failure on the 9 and 11's due to oil starvation as Kawa cut some corners with the system apparently). The crankcase is a nogo as are the cylinder sleeves and con rods.

SOLD!!!Carbs/Exhaust/CDI Igniter/COMPLETE Front End (forks/front brakes/front wheel/master cylinder/clip-ons/triple clamps)/Ignition Coils/Fuel Tap and Petckock/Side Fairings/Windscreen/SOLD!!!

Thanks for looking!
Scott

My ZX-9R

...and the remaining parts...

Remaining Fairings (cream stock tail/black and white fiberglass race tail/stock black and white front/race front black)

Brakelight (integrated signals)

Gastank (raw)

Airbox (complete)

Radiator

Rear Wheel

Subframe (front)

Case Cover

Oil Pan

Head (complete)

Pumps

Transmission

Wiring Harness (CDI gone)

ChrisB · 03-15-2008, 12:55 AM

will the forks work on a 97 zx7r? if so how much ya lookin to get for em?

godfather · 03-28-2008, 04:20 AM

How much for front wheel, and gauges?

Bluesteiner · 03-28-2008, 11:20 PM

i believe the 9 and 7 front ends are mostly identical, including the forks. pm'ed! remember, email is the best way to reach me! reach me at:

scdc0713@hotmail.com

i will check these forums, but not as often as i check my email.

bbigdaddy19820 · 03-29-2008, 07:39 PM

I was wondering bout the wheels(both) and the hooks for the seats

bdeisel · 03-29-2008, 09:31 PM

Will those wheels fit on a 01 zx9?

Bluesteiner · 05-02-2008, 05:29 PM

nope, email me with questions! that is by far the best way to contact me! still got many parts left, going fast though as it warming up and everyone is getting 9's into riding condition!

cams gone