My front bikes need pads im assuming they squealing..
think it is easy enough for a person with sumwhat a know how to do head or can most time figure it out. Or should take to shop to do, but money is a factor (right now). Isnt itas simple as removing a spring plate a taking old 1's out and re-installing new 1's?
Depending on your setup, it should be pretty easy to do. It's not hard to figure out but you do need some decent tools and such. But first, check your pads and make sure they are the problem. You could have just hit a hard spot, or they're vibrating in the caliper, or the disc is grooved/gouged, etc. Good luck.
