Quote:
Originally Posted by LimeBobZX14R
most bikes have 2 temp sensors..one for the guage and one for fan..find the one for the fan, it should have 2 wires attached, un plug and jump the switch..if the fan comes on you know the switch is bad...also you might want to check the rssistance for the switch..you'll need a d.v.o.m. to do so and resistance through the switch changes with temp...
if you have a repair manual for your bike it will tell you the values at at what deg's. it should be..
|
all that was in the previous link...but all directions are bike specific.
limebob, most bikes dont have 2 sensors, they have 1 sensor for the gauge and a temp SWITCH for the fan. the switch works the exact same way the thermostat works. when the temp gets high enough, the shaft moves and makes contact between the 2 poles