starting

[RoboCop]

alright so i got a 07 zzr600 when i first got it i could pull the clutch in all the way to start but now i have to only pull half any more and it wont start any less and it wont start any ideas

[Skank Doggy Dawg]

Originally Posted by RoboCop

alright so i got a 07 zzr600 when i first got it i could pull the clutch in all the way to start but now i have to only pull half any more and it wont start any less and it wont start any ideas

The clutch sensor on you POS bike is going out, you could replace the switch or just take the two wires that go to you clutch lever and solder then together, then you will never have to pull in the clutch, jsut dont try to start it in gear.

[SLIDER]

unfortunately this dipshit is right. check the clutch adjustment and switch first. But don't solder the wires together. It's only gonna land you on your ass as soon as you forget.

[RoboCop]

Originally Posted by SLIDER

unfortunately this dipshit is right. check the clutch adjustment and switch first. But don't solder the wires together. It's only gonna land you on your ass as soon as you forget.

sounds like its going to the dealer since i just bought this one in july