Fairing removal 07 ZX6_R

[bobrod68]

I am trying to remove the right side fairing. I have removed all bolts and push pins from outside of fairing and the inside by the tire, but it still seems to be stuck on the turn signal. Help????

[LT1MAN]

there is a little clip where the bottom of the side fairing meets the belly pan. if i remember correctly you have to work the belly pan front to back to get it to come loose.

[bobrod68]

Thanks I will try that. Do you have to remove the turn signal separate from the fairing?

[TxNinja07]

Originally Posted by bobrod68

Thanks I will try that. Do you have to remove the turn signal separate from the fairing?

yes. you must twist the turn signal so it can slide out of the light housing, then the fairing should come off.

[nonelower2001]

Originally Posted by bobrod68

Thanks I will try that. Do you have to remove the turn signal separate from the fairing?

No the turn signal will come off with the fairing.
Go to this site http://www.ninja6zone.com/forums/ and register with them and then go to the File Vault section and download the manual and it will tell you all you want to know.

[TxNinja07]

Originally Posted by nonelower2001

No the turn signal will come off with the fairing.
Go to this site http://www.ninja6zone.com/forums/ and register with them and then go to the File Vault section and download the manual and it will tell you all you want to know.

my bad i should have stated what i said better, twist the bulb, the actual triangular housing is attached to the fairing and will come off with it, sorry

[bobrod68]

thanks

[bobrod68]

I really appreciate all the help from you guys