» Sponsors
ATV.comRacer Parts WholesaleSuperbikeToyStore.comCheapCycleParts.comAdvanstarMotorcycleShowsMotorcycle.comMotorcycle.com Classifieds!SportbikeTrackGear

» Sponsors
Go Back   ZX Forums > Kawasaki Motorcycles > ZX-6R Forum

Please Visit our Site Sponsors Page
Motorcycle.com

Reply
 
LinkBack Thread Tools
Old 08-31-2008, 07:27 PM   #1 (permalink)
Newbie
 
Joined: Aug 2008
From: Norway
I Ride: 2005 Kawasaki ZX6-R

Posts: 6
Modification advice for my 2005 ZX6-R

I'm about to go on an upgrade-spree for my stock 2005 ZX6-R. After a crash on the track the other day, I decided to park the bike in the garage for the season, and to make a strong comeback in 2009. I need some help from you guys on what modifications to do. I've already ordered a new set of replica fairings, a new carbon fibre engine cover, a carbon fibre hugger, a carbon fibre front fender, an OEM solo seat cowl and a MRA Double Bubble Windscreen. First, I need help on finding a new fuel tank, as the paint got pretty rough treatment by the sandtrap on the track. Does anyone know where I can find a new tank? Preferably in carbon fibre, or at least something light?

With a new tank I should have covered the esthetiques- and the appearance-department pretty good. Now I need help on deciding on what upgrades to make. I'm new to Kawasaki. So, I ask you guys for help and information regarding slip-on versus a full system, information on the best brand of exhaust for my ZX6-R, given it to be slip-on or a full system, and which will give me the best performance, as sound isn't much of an important factor for me. I would also greatly appreciate information about slip-on's, air filter's and power commander's, for instance; to what extent is there something to gain with a power commander and an air filter fitted with the slip-on?

I will list the other upgrades I'm also thinking of ordering, and feel very free to add any parts you feel that is missing, or share experiences with any of the parts listed. The budget is pretty high on this one , so don't let that be a factor.

K&N Performance Oil Filter
Blue Galfer Stainless Steel Superbike Front Brake Lines
Blue Galfer Stainless Steel Superbike Rear Brake Lines
Pro Impact Frame Sliders
DELRIN Bar Ends
DELRIN Swingarm Sliders
Gold CRG Roll-A-Click Clutch Lever - Short
Gold CRG Roll-A-Click Break Lever - Short
Gold Vortex Rear Sets
In-line Brake Line Pressure Switch

Thank you so much in advance for you help and advice. It'll be greatly appreciated.

Last edited by julian : 08-31-2008 at 07:32 PM.
julian is offline   Reply With Quote
Sponsored Links
Advertisement
 

Old 08-31-2008, 08:14 PM   #2 (permalink)
Senior Member
 
sanamadapaka's Avatar
 
Joined: Jul 2008
From: Central Coast/Valley Cali
I Ride: '08 zx6r and '03 cbr 600rr

Posts: 107
while u have no budget limit i would go for full exhaust system and k & n airfilter, pc iii is a must.

dont forget rearsets, sprockets, performance rotors and calipers.
sanamadapaka is offline   Reply With Quote
Old 08-31-2008, 09:45 PM   #3 (permalink)
Newbie
 
Joined: Aug 2008
From: Norway
I Ride: 2005 Kawasaki ZX6-R

Posts: 6
Quote:
Originally Posted by sanamadapaka View Post
while u have no budget limit i would go for full exhaust system and k & n airfilter, pc iii is a must.

dont forget rearsets, sprockets, performance rotors and calipers.
Thank you for a good and quick response sir. But regarding that exhaust system, any brands in particular for the 05 ZX6-R? Or is the effect generally the same all across the board? If I decide to order a slip-on only, will there still be a need for a PC-III USB and airfilter? Or will the stock ECU cover that part then? And what about BMC filters? Any differences between the BMC and the K&N? What I'm really looking for is the brandnames, and where to order them, for the best equipment I can buy.

Again, thank you for all responses, feedback and answers.

Last edited by julian : 08-31-2008 at 09:48 PM.
julian is offline   Reply With Quote
Old 08-31-2008, 10:28 PM   #4 (permalink)
Senior Member
 
sanamadapaka's Avatar
 
Joined: Jul 2008
From: Central Coast/Valley Cali
I Ride: '08 zx6r and '03 cbr 600rr

Posts: 107
Quote:
Originally Posted by julian View Post
Thank you for a good and quick response sir. But regarding that exhaust system, any brands in particular for the 05 ZX6-R? Or is the effect generally the same all across the board? If I decide to order a slip-on only, will there still be a need for a PC-III USB and airfilter? Or will the stock ECU cover that part then? And what about BMC filters? Any differences between the BMC and the K&N? What I'm really looking for is the brandnames, and where to order them, for the best equipment I can buy.

Again, thank you for all responses, feedback and answers.
at the top of the forum page there's a sticky for after market parts for your bike
http://www.zxforums.com/forums/zx-6r...-zx-6r-rr.html

as far as slip on, pc iii is not required, however you are building track bike and i think a full exhaust system is in order. that is really up to you. people go for the best... akra or leo vince. the air filter can go either way...

you can find them in ebay, kneedraggers.com, cycle gear... just google it but you are in eu so you will probably find dealers in your part of the world.
sanamadapaka is offline   Reply With Quote
Reply



Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On


Powered by vBadvanced CMPS v3.0 RC2

Motorcycle News, Videos and Reviews
Harley Davidson Suzuki GSXR Honda 600RR Yamaha R6
Sportbike Forums GSXR Forum Honda 1000RR Yamaha R1
Sportbikes Forum Ducati Forum Kawasaki ZX R6 Forum
Motorcycle Forum Ducati Monster Kawasaki Forum R1 MessageNet

Powered by: vBulletin 3.6.8
Copyright ©2005 - %2$s www.zxforums.com
Website designed and developed by Random Computers

Search Engine Friendly URLs by vBSEO 3.1.0