39mm FCR tuning start point?

[JSG4dFan]

To make a long story short, I have decided to put a set of 39mm FCR's on my bone-stock 90 model ZX11 that I've had since 1992. If they make HALF the difference in feel/response that the FCR on my DR650 did, I'll be tickled. Any FCR gurus have advice for a good start point on the jetting? Any help will be greatly appreciated.


Thanks,

Scott

[rsr]

Scott go to bigbikeworld.com it's all there

[ninja11zx]

Here you go.

http://www.bigbikeworld.com/forum/fo...TID=23109&PN=1

[JSG4dFan]

Great info -- thanks guys. Now, if I could just find someone who's done this before, I could avoid all that work...