clearalternative tail light problems

[O'Donnell]

I just bought an itegrated led tail light from clear alternatives for my 97 zx6r. As soon as I opened the box I noticed there were no instructions or resistors even though the website I got it from said they would be in the box. Well I tried it anyway, when everything was in and together I tried it out. The running lights and breaklights work fine but the blinkers either don't work or they will blink left and right at the same time. Any ideas?

[truckguy]

when i ordered mine, it didnt come with instructions or the resistors. i think their is four different wires...one for the tail light, one for the brake light, one for each blinker...you do have all the separate wires from the tail light to the separate wires from the bike right?

[Flyingwarrior]

i had a little trouble with the blinkers too i think i got the instructions laying around somewhere i will try to find them and post it up on here for you.

[O'Donnell]

There were 2 wires that plug directly into the sockets for the stock running/break lights then 2 yellow and black wires for the left and right blinkers. I read on like that the blinker wires from the light go directly to power and the - wire that was on the normal blinker doesn't need to be used.