does anybody know what size socket and type of socket used to remove the ignition. any help would be appreciated. and does anybody know any thing about coils as my bike won't start have got power to the coils.
The 2 little bolts are not made to come out but they do and it isn't E Z some times you just need to drill the heads off them (JUST THE HEAD) so you can grab the treads take them out with vise grips. Every no and then you can get luck and get them with a socket just find 1 that a little to small and tap it on with a hammer.
As for the coils you have spark to each one right? Then it's probalably not the coils. That would ether leave fuel or air not getting in the cylinder. check all lines and clean the carbs out. And test the fuel pump while your at it.
