Hey guys, I have a 1990 ZX7 that has 10k on it. It was a parts bike that I saved from being scraped. It needed some work, Needed carbs and bunch of random parts but i finaly got it running. not bad for a free bike right? It actually runs really good starts right up. The only thing i don't know anything about is the clutch. When i opened the motor There was only the clutch basket. I Have the friction plates the springs everything to put it back together. I just don't know how. Anyone got a quick lesson or a tutorial? I don't know which plates go in first or last. After putting the clutch together I can finaly take her out Also, theres little nicks in the metal plates but i don't think they effect anything. (these plates came with the bike) they are all stock for this bike
__________________
1990 ZX7, Yoshimura exhaust, 1996 all around fairings, anyone have a tail fairing? 96+
you should get an exploded view of the configuration from a manaul or online and that could clear all the fog for you,
bikebandit.com
ronayers.com
kawasaki.com
__________________
S.S. D&D with carbon fiber can, Stage 1 jet kit, ignition advancer, -1 in rear, K&N air filter, smoke SR series windscreen, lowering kit
bikebandit.com will show you the exploded view of the assembly. there is also a write up on either this forum or kawiforums. you gotta make sure you put the steel plates on the right side out. if you look at them you will notice on the "teeth" there is a smooth side and a sharper cut side. the cut side goes facing out. and be sure to put the last plate in the shallow groove.
ZX7 Clutch Help
Also, theres little nicks in the metal plates but i don't think they effect anything. (these plates came with the bike) they are all stock for this bike 
smoke SR series windscreen, lowering kit
