|
» Site Navigation |
|
» »
»
» Motorcycle Forums
|
» Links |
|
|
|
 |
10-22-2007, 02:07 AM
|
#1 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
2004-2005 ZX-10 *Parts Blowout!*
I have lots of spare parts from a 2004 and 2005 ZX-10 that I parted out. The 2004 has a motor I'm parting out so let me know if you need anything off the motor and the 2005 ZX-10 has a complete good motor (does not include wire harness). Here are the parts I have listed below:
-Clear Title Frames w/ Damage (I have 2 of these one 2004, one 2005)
they are both cracked and dented in the same places-$1,800 each
-Motor (has about 10,000 miles-came off a 2005 and ran great)-$1,200
-Galfer Front & Rear Braided Lines-$60 set (wrapped w/ black vinyl)
-radiator-$125
-upper triple tree-$45
-lower triple tree-$90
-front wheel (excellent shape)-$175
-front caliper set-$50 each set (I have 2 of these)
-rear caliper-$25 each (I have 2 of these)
-rear master cylinder-$25 each (I have 2 of these)
-front rotor set-$100
-left handlebar switch-$35
-right handlebar switch-$35
-rear rotors-$25 (I have 2 of these)
-Left Pass peg w/ bracket-$25 (I have 2 of these)
-Right Pass peg w/ bracket-$15 (exhaust bracket is broken off)
-Chain guard (2 pieces)-$20 (I have 2 sets of these)
-swingarm-$30 (tab on right side is broken off that holds brake line)
-battery tray-$25 (damaged-I have pix of this)
-rear shock-$75 each (I have 2 of these)
-main wire harness-$90
Motor Parts:
-crankshaft
-left starter cover
-starter
-pistons & rods
-stator
-flywheel
& more...
**I have more parts other than these listed so PM me or call me at (817.637.0183) my name is Josh.**
|
|
|
|
Sponsored Links
|
Advertisement
|
|
|
10-23-2007, 10:52 PM
|
#2 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
10-26-2007, 01:40 PM
|
#3 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
anybody need parts?
|
|
|
|
|
10-29-2007, 09:44 AM
|
#4 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
10-29-2007, 10:07 AM
|
#5 (permalink)
|
|
Newbie
Joined: May 2007
From: IN THE WOODS
Posts: 19
|
dibs on front wheel pending shipping 49330 UNDIBS SORREY NEED A GRAY WHEEL FOR A 636 THANKS
Last edited by Rrexer : 10-29-2007 at 10:20 AM.
|
|
|
|
|
10-31-2007, 01:39 PM
|
#6 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
Updated Parts List! ~10/31/07~
I have lots of spare parts from a 2004 and 2005 ZX-10 that I parted out. The 2004 has a motor I'm parting out so let me know if you need anything off the motor and the 2005 ZX-10 has a complete good motor (does not include wire harness). Here are the parts I have listed below:
-Clear Title Frames w/ Damage (I have only 1 of these left off a 2004)
cracked and dented in the same places-$1,800 each
-Motor (has about 10,000 miles-came off a 2005 and ran great)-$1,200
-Galfer Front Braided Line Set-$40 (wrapped w/ black vinyl)
-radiator-$125
-upper triple tree-$45
-lower triple tree-$90
-front wheel (excellent shape)-$175
-front caliper set-$50 each set (I have 2 of these)
-rear caliper-$25 each (I have 2 of these)
-rear master cylinder-$25 each (I have 2 of these)
-front rotor set-$100 (only 1 set left!-has some scratches-I have pix)
-left handlebar switch-$35
-right handlebar switch-$35
-rear rotors-$25 (I have 2 of these)
-Left Pass peg w/ bracket-$25 (I have 2 of these)
-Right Pass peg w/ bracket-$15 (exhaust bracket is broken off)
-Chain guard (2 pieces)-$20 (I have 2 sets of these)
-swingarm-$30 (tab on right side is broken off that holds brake line)
-battery tray-$25 (damaged-I have pix of this)
-rear shock-$75 each (I have only 1 of these left!)
-main wire harness-$90
Motor Parts:
-crankshaft
-left starter cover
-starter
-pistons & rods
-stator
-flywheel
& more...
**I have more parts other than these listed so PM me or call me at (817.637.0183) my name is Josh.**
|
|
|
|
|
11-10-2007, 04:30 AM
|
#7 (permalink)
|
|
Newbie
Joined: Oct 2007
From: Toronto, Canada
I Ride: 2004 black zx10r
Posts: 2
|
Bought rotors from him (Josh), great service and delivery was done within the time said.
R.
__________________
Don't ride faster than your guardian angel can fly.
|
|
|
|
|
11-13-2007, 08:16 AM
|
#8 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump...Thanks Ricardo!
|
|
|
|
|
11-21-2007, 08:39 AM
|
#9 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
11-30-2007, 12:04 PM
|
#10 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump-parts guys!
|
|
|
|
|
12-06-2007, 08:31 AM
|
#11 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
12-12-2007, 10:27 AM
|
#12 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
12-20-2007, 10:52 AM
|
#13 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
~Update 12/20/07~
Front Wheel-Sold!
Frames-Sold!
RH Switch-Sold!
Lower Triple Tree-Sold!
....Anyone need Parts??.....
|
|
|
|
|
01-07-2008, 10:09 AM
|
#14 (permalink)
|
|
Member
Joined: Oct 2007
From: TX
Posts: 30
|
bump!
|
|
|
|
|
01-24-2008, 07:08 PM
|
#15 (permalink)
|
|
Newbie
Joined: Jan 2008
From: Brisbane, Australia
Posts: 1
|
parts
I'm chasing the clutch lever assembly (including switch), bracket that instrument cluster bolts to and a camshaft position sensor (bolts to front of engine above headers). Let me know if you have these parts and how much.
Thanks
|
|
|
|
|
02-23-2008, 11:48 AM
|
#16 (permalink)
|
|
Newbie
Joined: Jan 2008
From: Brooklyn, NY
Posts: 7
|
need passenger pegs/brackets asap
still have passenger pegs & brackets? need asap, going to daytona march 4th.
jerry
347-682-8701
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
